฿890.00Original price was: ฿890.00.฿650.00Current price is: ฿650.00.
การใช้งานสินค้า / Description :
1) Install the correct size adapter and Tight to make sure it doesnt leak. Place the gasket in a downward position.
2) YOUR CAR SHOULD BE OFF, DO NOT START THE CAR YET!
3) Fill the coolant funnel about 1/3 up while COLD,so when system burps fluid falls into the system rather than more air.
4) Go to your car and set the climate controll settings(or heat setting) to the hot, but make sure that the fan/heater is “OFF”.
5) Now START you carlet the car idle for a while until it’s hot enough to open the thermostat and turn on the fans.
6) After waiting, and once the thermostat opens up to cool your engine, you’ll see the coolant level drop, and a few to a large amount of air bubbles comming up, this is the trapped air escaping your cooling system.
7) After standard hour of running, if you still see air bubble comming out, check your overflow tank and make sure it has coolant in it.
8) When run the engine, fluid level should be at low position. Keep RPM on idle position.(Shut down the engine if notice the fluid level rise excessively. Wait for fluid level go lower before restarting the engine.)Once the bubbling stopped ,Use Fluid Stopper for remaining fluid inside the funnel
รายละเอียดตัวสินค้า / Content :
1 x MLid
1 x Funnel
2 x 45 Degree Elbow
1 x Fluid Stopper
1 x 5 inches Straight Extension
1 x Large Cap A
1 x Medium Cap B
1 x Small Cap C
1 x Threaded Cap D
1 x Large Adapter A with Gasket
1 x Medium Adapter B with Gasket
1 x Small Adapter C with Gasket
1 x Threaded Cap Adapter D with Gasket for GM
1 x Threaded Cap Adapter E with Gasket for Ford